Using 9/16 inch wrench, install 90-degree elbow (A) to tee (B). Adjust elbow to face engine.
Position and connect hose (C) to 90-degree elbow
(A) and 45-degree elbow (C).
Using 3/4 inch wrench, tighten hose (C)
connectors to elbows.
Never activate smoke generator in a building or closed area or
with personnel near.
Perform smoke screening (TM 9-2350-222-10).
Check smoke generator lines for leaks. Correct as necessary.
Install engine shroud (page 9-3).
End of Task