MAGNETIC CLUTCH AND HOUSING REPLACEMENT (Sheet 4 of 6)
CLEANING AND INSPECTION:
Clean all metallic parts in dry cleaning solvent (Item 54, Appendix D).
Inspect all parts for damage or wear.
Replace all unserviceable parts.
Position gasket (C) and adapter (D) on magnetic clutch (E).
Using allen wrench, install six screws (B).
Position gasket (F) and pump (G) on adapter (D).
It may be necessary to slightly rotate spline drive of pump to
aline with shaft of magnetic clutch.
Using two 3/4 inch wrenches, install two screws (H), new lockwashers (J), and nuts (K).
Go on to Sheet 5