TM 9-2350-222-20-1-5
RIGHT ANGLE DRIVE, CLUTCH, AND PUMP REPLACEMENT (Sheet 1 of 8)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Installation
9/16 in. socket with 1/2 in. drive
TOOLS:
7/8 in. combination box and
5/8 in. socket with 1/2 in. drive
open end wrench
3/4 in. socket with 1/2 in. drive
3/4 in. combination box and
1/2 in. socket with 1/2 in. drive
open end wrench
Sling and lifting device
5/8 in. combination box and
(200 pound capacity)
open end wrench
11/16 in. combination box and
Pry bar
open end wrench
Extension with 1/2 in. drive, 10 in. long
SUPPLIES:
Container (catch hydraulic fluid)
Preformed packing (MS28775-219) (3 required)
Gasket (7383694)
Gasket (7399926)
Preformed packing (MS28775-214)
Preformed packing (MS28775-232) (2 required)
Lockwasher (MS35338-47) (7 required)
Lockwasher (MS35338-46) (5 required)
Lockwasher (MS35338-48) (4 required)
PERSONNEL: Two
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURE:
Remove transmission shroud (page 9-20)
Go on to Sheet 2
TA253659