TM 9-2350-222-20-1-5
HYDRAULIC PUMP DISCHARGE TUBE ASSEMBLY REPLACEMENT (Sheet 2 of 4)
REMOVAL:
Place drip pan under front hull drain valve.
Place rags under union (A) to catch oil.
3.
Using 7/16 inch socket with extension, remove
4.
Remove clamp (C) and displace cables for access
to union (A).
5.
Using screwdriver, remove clamp (D).
6.
Pull hose (E) from tube (F).
7.
Using 9/16 inch socket with extension, remove
screw and lockwasher (G) and remove clamp (H)
from tubes. Throw lockwasher away.
Using 1-5/8 inch wrench to hold union (A), use
8.
1-1/2 inch wrench to remove nut (J) from union
9.
Place rags under valve (K) to catch oil.
10.
Using 1-11/16 inch wrench to hold nut (L) on
valve (K), use 1-1/2 inch wrench to remove
nut (M) from valve (K).
11.
Using 1-11/16 inch wrench to hold nut (N) on
valve (K), use 1-1/2 inch wrench to remove
nut (P) from valve (K). Remove valve (K)
from vehicle.
12.
Using 1-1/2 inch wrench on nut (Q), remove
nut (Q) from elbow (R) and remove hose (S)
from vehicle.
Using 9/16 inch wrench, remove screw, flat
13.
washer, spacer, lockwasher (T), and nut
(hidden) and remove clamp (U) from bracket
(V). Throw lockwasher away.
Remove tube (W) with union (A) from
14.
vehicle.
15.
Using 1-5/8 inch wrench on union (A) and
1-1/2 inch wrench on nut (X), remove union
(A) from nut (X).
TA141199