HYDRAULIC RESERVOIR SUCTION HOSE ASSEMBLY REPLACEMENT (Sheet 2 of 5)
Put rags under front and rear suction hose
connections to catch any oil remaining in hose
With one person in turret using 3/4 inch socket
and extension, remove four screws and four
to adapter (C). Other person in driver's
compartment holds socket in place. Throw
Remove suction hose flanges (B) from adapter
Pull suction hose (D) out of adapter (C).
Remove preformed packing (E) from adapter
(C). Throw packing away.
Using rags, wipe inside of adapter (C) to
clean up oil in adapter, Install clean rags
into adapter after wiping.
Go on to Sheet 3