HYDRAULIC RESERVOIR WINCH DRAIN TUBE ASSEMBLY REPLACEMENT
(Sheet 4 of 4)
Using 13/16 inch wrench to hold connector (F)
and using 11/16 inch wrench on nut (G),
tighten nut (G).
Using 11/16 inch wrench, install nut (H) on
tubs (D) onto elbow (B).
Install clamp (J) onto tube (D).
Using 7/16 inch wrench, install screw and new
Lockwasher (K) through clamp (J) into reservoir
mounting boss (L).
Refill reservoir with oil (LO 9-2350-222-12).
End of Task