REAR DRAIN VALVE REAR ROD, COUPLING, AND CLEVIS REPLACEMENT
(Sheet 3 of 6)
Measure and record length of threads on both ends of rod (H).
Using 9/16 inch wrench, loosen coupling jamnut (E) while holding coupling (F) with another 9/16
Using 9/16 inch wrench, loosen clevis jamnut (J) while holding clevis (C) with pliers.
Using pliers, if necessary, remove clevis (C), clevis jamnut (J), coupling (F), and coupling jamnut
(E) from rod (H).
Remove parts from vehicle.
Go on to Sheet 4