REAR DRAIN VALVE REAR ROD, COUPLING, AND CLEVIS REPLACEMENT
(Sheet 4 of 6)
Install clevis jamnut (A) and clevis (B) on either end of rod (C).
Adjust clevis (B) and clevis jamnut (A) until original length of threads can be measured on rod (C)
with clevis jamnut (A) finger tightened against clevis (B) (page 16-152, step 5).
Using wrench, tighten clevis jamnut (A) against clevis (B), while holding clevis (B) with pliers.
Go on to Sheet 5