BRAKE LEFT HAND SLAVE CYLINDER AND TUBE ASSEMBLY REPLACEMENT
(Sheet 3 of 4)
CLEANING AND INSPECTION:
Clean all metallic parts in dry cleaning solvent (Item 54, Appendix D).
Inspect all parts for damage or wear. Replace
all unserviceable parts.
Inspect tube assembly nut for cracks. Replace
tube assembly if any are found.
Insert new packing (A) in groove of slave
Position and slide slave cylinder (B) down over
housing assembly push rod. Wiggle it back and
forth while pushing down. Push slave cylinder
(B) forward when on housing assembly (C), then
pull back to make sure catch (D) engages in
Tighten mounting nut (E) to stud (F) finger
Using socket, tighten mounting nut (E).
Go on to Sheet 4