BRAKE LEFT HAND SLAVE CYLINDER AND TUBE ASSEMBLY REPLACEMENT
(Sheet 4 of 4)
Remove plastic cap from tee (G) and plastic plug and masking tape from tube assembly (H).
Thread nut of tube assembly (H) on tee (G) finger tight.
Position two new gaskets (J) and end of tube
assembly (H) over part in slave cylinder (B).
Insert bolt (K) and tighten finger tight.
Using 13/16 inch wrench, tighten bolt (K).
Using 11/16 inch wrench, tighten nut of tube
assembly (H) to tee (G).
End of Task