TM 9-2350-222-20-14
BRAKE NIPPLE AND HOSE ASSEMBLY REPLACEMENT [Sheet 4 of 6)
CLEANING AND INSPECTION:
1.
Clean all metallic parts in dry cleaning solvent (Item 54, Appendix D).
2.
Inspect all parts for damage or wear. Replace all unserviceable parts.
3.
Inspect tube and hose assembly nuts for cracks. Replace tube or hose assembly if any are found.
INSTALLATION:
1.
Insert nipple (A) through hole in bracket (B).
2.
Thread nut (C) onto nipple (A) finger tight.
3.
Using 7/8 inch wrench to hold nipple (A) and
13/16 inch wrench on nut (C), tighten nut.
4.
Thread nut of tee (D) on nipple (A) finger tight.
NOTE
Do not tighten nut of tee (D) at this time. It will have to be
alined later.
Go on to Sheet 5
TA140364
13-57