BRAKE QUICK-DISCONNECT AND HOSE ASSEMBLY REPLACEMENT (Sheet 4 of 7)
CLEANING AND INSPECTION:
Clean all metallic parts in dry cleaning solvent (Item 54, Appendix D).
Inspect all parts for damage or wear. Replace all unserviceable parts.
Inspect tube and hose assembly nuts for cracks. Replace tube or hose assembly if cracks are
Insert coupling half (A) through hole in bracket
Thread nut (C) onto coupling half (A) finger
Using adjustable wrench to hold coupling (A)
and 7/8 inch wrench on nut (C), tighten nut.
Do not tighten nut of tee (D) at
this time. It will have to be alined
Thread nut of tee (D) on coupling half (A) finger
Go on to Sheet 5