TM 9-2350-222-20-1-4
BRAKE QUICK-DISCONNECT AND HOSE ASSEMBLY REPLACEMENT (Sheet 2 of 7)
REMOVAL:
Place rags under hose assembly (A) to absorb brake fluid.
1.
2.
Using hand, turn brake quick-disconnect (B) off coupling half (C).
3.
Using adjustable wrench to hold elbow (D) and 11/16 inch wrench on nut of hose assembly (A),
disconnect hose (A) from elbow (D).
Using adjustable wrench to hold elbow (D)
4.
and 11/16 inch wrench on nut of tube
assembly (E), disconnect tube assembly (E)
from elbow.
NOTE
Insert plastic plug in nut of
tube assembly (E).
Using 11/ 16 inch wrench, disconnect hose
5.
assembly (A) from tee (F).
NOTE
If hose assembly (A) is not
defective, insert plastic Plugs
in end fittings.
6. Using adjustable wrench to hold tee (F) use 11/16 inch wrench and remove cap or valve (G).
7.
Using 3/4 inch wrench to hold top of disconnect (B) and 11/16 inch wrench on nut of tee (F), remove
tee.
TA253432
Go on to Sheet 3