TM9-2350-222-20-1-3
POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT
(2D ENGINE) (Sheet 7 of 9)
NOTE
It may be necessary to pull frame (P) out and depress three
f l a n g e s (Q) on frame bottom during installation to clear
protruding obstacles on the engine. It may be necessary to
loosen and move brackets (B), (F), and (L) slightly before oil
cooler support frame can be installed.
12. Install oil cooler support frame.
13. Using alining punch, aline screw holes and,
using 1/2 inch socket with extension, install
five screws (R).
14. Using 1/2 inch socket and 1/2 inch wrench,
install screw and new self-locking nut (S),
Go on to Sheet 8
TA139483
6-115