TM9-2350-222-20-1-3
ENGINE OIL COOLER SCREEN REPLACEMENT (Sheet 1 of 2)
TOOLS: 1/2 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
PRELIMINARY PROCEDURE:
NOTE
If removing screens on 2A engine, go to step 3.
REMOVAL:
1.
Using socket with extension through harness
and into bracket (A), remove two screws and
washers (B).
2.
Pull harness and bracket (A) to right of oil
cooler screen for access to screws (C).
3.
Using socket, remove four screws and washers
(c).
4.
Lift cooler screen away.
INSPECTION:
1.
Check screen and brackets for cracks, tears,
bending, and dents.
2.
Replace bad parts.
Go on to Sheet 2
TA139486
6-118