TM9-2350-222-20-1-3
ENGINE OIL COOLER SCREEN REPLACEMENT (Sheet 2 of 2)
NOTE
If installing screens on 2A engine, do steps 1, 2, and 5.
INSTALLATION:
1.
Place cooler screen on oil cooler.
2.
Start threads of four screws with washers (A) by hand to hold screen in place.
Using socket, tighten screws and washers (A).
3.
4.
Using socket with extension through harness and into bracket (B), install and tighten two screws
and washers (C).
5.
Install 2A powerplant (page 5-14) or 2D powerplant (page 5-37).
End of Task
TA139487
6-119