TM 9-2350-222-34-1
HYDRAULIC RESERVOIR REPLACEMENT (Sheet 6 of 15)
23. Using 1-1/2 inch wrench, disconnect tube assembly
nuts (AV and AW).
24. Using 2 inch wrench on tube assembly nut (AX) and
1-3/4 inch wrench on union (AY), disconnect nut and
remove union and packing (under union). Throw packing
away.
25. Using 3/4 inch socket, remove four screws and
lockwashers (AZ).
26. Lift off valve assembly (BA) with its attached parts.
27.
Using 9/16 inch socket, remove two screws
(BB), lockwashers (BC), and four retaining
straps (BD).
28.
Remove tube assembly (BE)
29.
Using 7/16 inch socket on screws (BF) and 7/16
inch wrench on locknuts (BG), remove six
screws, locknuts, and two filter assemblies (BH)
with their attached parts.
Go on to Sheet 7
TA130832
12-7
