TM 9-2350-222-34-1
HYDRAULIC RESERVOIR REPLACEMENT (Sheet 1 of 15)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS:
13/16 in. combination box and open end
3/4 in. socket with 1/2 in. drive
wrench
10 in. extension with 1/2 in. drive
11/16 in. combination box and open end
wrench
Lifting device
7/16 in. combination box and open end
2 in. open end wrench
wrench
1-1/8 in. open end wrench
3/4 in. combination box and open end
1-3/8 in. open end wrench
wrench
1-5/8 in. open end wrench
1/2 in. combination box and open end
1-3/4 in. open end wrench
wrench
1-1/4 in. open end wrench
7/16 in. socket with 1/2 in. drive
1-1/2 in. open end wrench
9/16 in. socket with 1/2 in. drive
8 in. adjustable wrench
SUPPLIES:
Preformed packing (MS28778-12)
Gaskets (10864321) (2 required)
Preformed packing (MS28778-228)
Preformed packing (MS28778-20)
Plastic caps and plugs
Preformed packing (MS28778-16)
Preformed packing (MS28775-35)
Preformed packing (MS28778-6)
PERSONNEL:
Two
REFERENCES:
LO 9-2350-222-12
TM 9-2350-222-20-1
TM 9-2350-222-34-2
PRELIMINARY PROCEDURES:
Remove turret (TM 9-2350-222-34-2)
Remove first shot fire extinguisher cylinder (TM 9-2350-222-20-1)
Drain reservoir (LO 9-2350-222-12)
Remove driver's seat assembly (TM 9-2350-222-20-1)
Go on to Sheet 2
TA130827
12-2