TM 9-2350-222-34-1
STEERING CONTROL SHIELD REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Cleaning and Inspection
Installation
TOOLS:
Slip joint pliers
.3/4 in. combination box and open end wrench
7/16 in. combination box and open end wrench
9/16 in. combination box and open end wrench
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N.m)
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
SUPPLIES:
Cotter pin (MS24665-287)
Dry cleaning solvent (Item 12, Appendix B)
Rags (Item 31, Appendix B)
Lockwasher (MS35335-35) (2 required)
REFERENCE:
TM 9-2350-222-20-1
PRELIMINARY PROCEDURE:
Remove left fuel tank (page 4-51)
Go on to Sheet 2
TA252648
Change 1 10-12
