TM 9-2350-222-34-1
STEERING CONTROL SHIELD REPLACEMENT (Sheet 3 of 4)
CLEANING AND INSPECTION:
2. Inspect all parts for damage or wear. Replace if required.
INSTALLATION:
1. Position shield (A) over shaft (B).
2. Using 9/16 inch wrench, install two new lockwashers (C) and two screws (D).
3. Using torque wrench and socket, tighten screws (D) to 15-20 lb-ft (20-27 N.m).
Go on to Sheet 4
TA252650
Change 1 10-14