TM 9-2350-222-34-1
TRACK ADJUSTING LINK REPAIR (Sheet 1 of 13)
PROCEDURE INDEX
PROCEDURE
PAGE
Disassembly
Inspection
Assembly
Testing
TOOLS:
7/16 in. socket with 1/2 in. drive
Grease gun
3/4 in. socket with 1/2 in. drive
Hammer, dead blow
15/16 in. socket with 1/2 in. drive
Knife, pocket
3/8 in. combination box and open end
Pliers, slip joint
wrench
1/2 in. combination box and open end
Tape, measuring
wrench
Torque wrench with 1/2 in. drive
5/8 in. combination box and open end
(0-175 lb-ft) (0-237 Nm)
wrench
Vise
7/8 in. combination box and open end
wrench
SPECIAL TOOLS:
SUPPLIES:
Bearing (7974760)
Packing (MS28775-333)
Packing (NAS1523C-10B) (as required)
Cup (30781) (CT2875-500)
Fitting, grease (MS15003-1)
Retainer, packing (MS28782-36)
(2 required)
Grease lockwasher (Item 14, Appendix )
Lockwasher (MS35338-44)
Wood block, 8 in. x 8 in. x 18 in.
(2 required)
Packing (MS28775-125)
TA248766
Go on to Sheet 2
Change 2 9-29