TM 9-2350-222-34-1
COMPENSATING IDLER ARM ASSEMBLY REPAIR (LEFT AND RIGHT) (Sheet 5 of 5)
4. Using two persons, reposition idler arm on arbor
press.
5. Position spacer (F) over idler arm spindle (G).
6. Position 4 inch inside diameter drive collar
bushing over spacer (F).
7. Using arbor press, drive spacer (E) onto spindle
(G) of the compensating idler arm (C).
NOTE
Seat spacer firmly all the way down to the bottom of the spindle.
End of Task
TA130781
9-28