TM 9-2350-222-34-1
BRAKE MASTER CYLINDER REPAIR (Sheet 4 of 5)
NOTE
Coat cylinder hose, valve seat, and valve cup with hydraulic fluid (Item 15, Appendix B).
ASSEMBLY:
1.
Place cylinder (A) in vise with bore facing up.
2.
Install seat (B) with flat portion facing down into
cylinder (A).
3.
Install spring (C) and valve (D) into retainer (E).
Press down and turn to seat valve (D) into
retainer (E).
4.
Place retainer (E) into spring (F).
5.
Place rubber cup (G) over end of spring (F).
6.
Install spring (F) with assembled components (E
and G) into cylinder (A).
7.
Insert piston (H) and washer (J) into cylinder (A).
8.
Using screwdriver, press down on piston (H),
install retaining ring (K).
Go on to Sheet 5
TA130735
8-5