TM 9-2350-222-34-1
SHIFTING CONTROL SLEEVE ASSEMBLY REPLACEMENT (Sheet 1 of 2)
TOOLS: 7/16 in. combination box and open end wrench
9/16 in. combination box and open end wrench(2 required)
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N-m)
7/16 in. socket with 1/2 in. drive
9/16 in. crowfoot wrench with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
REFERENCE: TM 9-2350-222-20-1
REMOVAL:
1. Using 9/16 inch wrench, remove screw (A) securing front intermediate rod (B) to bulkhead shaft rod end (C).
2. Using 9/16 inch wrench to hold nut (D), use 9/16 inch wrench and remove rod end (C).
Go on to Sheet 2
TA130680
6-10
