TM 9-2350-222-34-1
ACCELERATOR CONTROL LINKAGE ASSEMBLY REPAIR (Sheet 13 of 13)
26. Install new seal (AG) into groove in cover (AH).
27.
Position cover (AH) onto riser housing (S).
28. Using 1/2 inch wrench, install four screws and
lockwashers (AJ) to hold cover (AH) to riser housing (S).
29. Make sure tube assembly and accelerator lever operate smoothly when tube assembly is moved within its limits.
30. Install accelerator control linkage assembly into vehicle (page 4-101).
End of Task
TA130579
4-123/(4-124 blank)