TM 9-2350-222-34-1
HULL-FRONT MASTER HARNESS ASSEMBLY REPLACEMENT (Sheet 1 of 21)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS:
8 in. adjustable wrench
1/2 in. combination box and open end wrench
7/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Spanner wrench
7/16 in. combination box and open end wrench
Slip joint pliers
7/8 in. combination box and open end wrench
9/16 in. combination box and open end wrench
I.D. tags
REFERENCES: TM 9-2350-222-20-1
TM 9-2350-222-34-2
PRELIMINARY PROCEDURE: Remove turret (TM 9-2350-222-34-2)
Remove personnel heater (TM 9-2350-222-20-1)
Remove fire extinguisher cylinders (TM 9-2350-222-20-1)
Remove left heater duct (TM 9-2350-222-20-1)
Remove generator regulator (TM 9-2350-222-20-1)
Remove driver's escape hatch (TM 9-2350-222-20-1)
Make sure to disconnect three battery ground straps (TM 9-230-222-20-1).
Go on to Sheet 2
TA130581
5-2