TM 9-2360-222-34-1
FUEL PRIMER INLET TO ENGINE TUBE ASSEMBLY REPLACEMENT (EARLY MODEL)
(Sheet 4 of 6)
3. Install two clamps (E) and (F) to primer inlet tube
(G).
4. Place clamp (H) in position on primer inlet tube
(G).
5. Place tube (G) in position by inserting it from
engine compartment.
6. Using 9/16 inch wrench, reach through access
opening (J) and connect front tube (G) to
bulkhead nipple (A).
Go on to Sheet 5
Change 1 4-83.
TM 9-2360-222-34-1
