TM 9-2360-222-34-1
FUEL PRIMER INLET TO ENGINE TUBE ASSEMBLY REPLACEMENT (EARLY MODEL)
(Sheet 1 of 6)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Inspection
Installation
TOOLS:
9/16 in. combination box and open end wrench
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
11/16 in. combination box and open end wrench (2 required)
SUPPLIES:
Lockwasher (MS35338-44) (3 required)
REFERENCE: TM 9-2350-222-20-1
PRELIMINARY PROCEDURES: Remove powerplant (TM 9-2350-222-20-1)
Remove left bulkhead access cover (TM 9-2350-222-20-1)
Remove left air cleaner inlet hose (TM 9-2350-222-20-1)
Remove left fuel tank (page 4-51)
REMOVAL:
1. Using 7/16 inch socket, remove screw (A) and
lockwasher (B) holding rear clamp (C) and tube
(D) to clamp mount. Throw lockwasher away.
2. Using 7/16 inch socket, remove screw (E) and
lockwasher (F) holding center clamp (G), located
left of air cleaner opening. Throw lockwasher
away.
TA252606
Change 1 (4-80.7 blank)/4-80.8
