TM 9-2350-222-20-2-3-2
CUPOLA AZIMUTH GEAR BOX HANDLE INSTALLATION PROCEDURE
36-64.
TOOLS: 3/32" drive pin punch
Hammer (soft brass head)
PERSONNEL; One
REFERENCES: TM 9-2350-222-10 for procedure to traverse cupola
EQUIPMENT LOCATION INFORMATION:
CALLOUT
FOLDOUT
EQUIPMENT
11
Driver's Master Control Panel
7
Turret Traverse Lock
17
Cupola Azimuth Gear Box
EQUIPMENT CONDITION: Driver's master control panel MASTER BATTERY switch set to OFF
Turret traverse lock set to LOCKED
Procedure
Step
1.
Put shoulder headed pin (1) in grip (2).
2.
Put washer (3) on shoulder headed pin (1).
3.
Put crankshaft (4) on shoulder headed pin (1).
4.
Using punch and hammer, tap pin (5) in crankshaft (4).
5.
Put crankshaft (4) on cupola azimuth gear box (6).
6.
Using punch and hammer. tap in pin (7).
NOTE
Follow-on Maintenance Action Required:
Traverse cupola to check cupola azimuth gear box
handle for proper operation (TM-10).
END OF TASK
Para 36-64
36-148
