TM 9-2350-222-20-2-3-2
36-67. CUPOLA AZIMUTH LOCK INSTALLATION PROCEDURE (CONT)
Procedure
Step
NOTE
If shims were removed with cupola azimuth lock (1),
put them in before installing lock.
Using socket wrench, attach azimuth lock (1) to cupola (2) with two washers (3) and
1.
two screws (4).
Using pliers. install lockwire (5) between two screws (4) (JPG).
2.
NOTE
Follow-on Maintenance Action Required:
Traverse cupola to check cupola azimuth lock for proper
operation (TM-10).
END OF TASK
Para 36-67 Cont
36-153
