TM 9-2350-222-20-2-3-2
36-63.
CUPOLA AZIMUTH GEAR BOX HANDLE REMOVAL PROCEDURE
TOOLS: 3/32" drive pin punch
Hammer (soft brass head)
PERSONNEL: One
EQUIPMENT LOCATION INFORMATION:
CALLOUT
EQUIPMENT
FOLDOUT
11
Driver's Master Control Panel
7
Turret Traverse Lock
17
Cupola Azimuth Gear Box
EQUIPMENT CONDITION: Driver's master control panel MASTER BATTERY switch set to OFF
Turret traverse lock set to LOCKED
FRAME 1
Procedure
Step
1.
Using punch and hammer, remove pin (1) from crankshaft (2).
2.
Remove crankshaft (2) from cupola azimuth gear box (3).
3.
Using punch and hammer, remove pin (4) from crankshaft (2).
4.
Remove washer (5), grip (6), and shoulder headed pin (7).
END OF TASK
Para 36-63
36-147
