TM 9-2350-222-20-2-3-2
35-7.
M240 MACHINE GUN MOUNT INSTALLATION PROCEDURE (CONT)
FRAME 2
STEP
PROCEDURE
NOTE
When doing step 1, soldier A holds machine gun mount in piece
while soldier B puts in screws.
1.
Put machine gun mount (1) on combination gun mount (2) for main gun.
2.
Using socket wrench, attach machine gun mount (1) to combination gun mount (2) with four new
screws (3) and four flat washers (4).
3.
Connect solenoid electrical connector (5) to vehicle electrical connector (JPG).
NOTE
Follow-on Maintenance Action Required:
Install 7.62-mm spent cartridge case bag (TM-10).
Install 7.62-mm machine gun (TM-10).
Check 7.62-mm machine gun trigger clearance and adjust as
required (para 36-10).
Boresight and zero 7.62-mm machine gun (TM-10).
Check operation of 7.62-mm machine gun firing circuit (TM-10).
END OF TASK
Para 35-7 Cont
35-24 Change 1
