TM 9-2350-222-20-2-3-2
M240 MACHINE GUN MOUNT INSTALLATION PROCEDURE
35-7.
3/4 in. socket (1/2 in. drive)
TOOLS:
1/2 in. drive torque wrench (0 to 250 foot-pounds)
3/4 in. combination wrench
Needle nose pliers
3/16 in. socket head screw key (Allen wrench)
3/16 in. hex head socket (3/8 in. drive)
3/8 in. drive torque wrench (0 to 50 foot-pounds)
Lockwire
SUPPLIES:
Screws (MS18153-113) (four)
PERSONNEL: Two
TM 9-2350-222-10 for procedures to:
REFERENCES:
Install 7.62-mm spent cartridge case bag
Install 7.62-mm machine gun
Remove 7.62-mm mount travel lock
Boresight and zero 7.62-mm machine gun
Check operation of 7.62-mm machine gun firing circuit
JPG for procedures to:
Use torque wrench
Install lockwire
Connect electrical connectors
EQUIPMENT LOCATION INFORMATION:
CALLOUT
FOLDOUT
EQUIPMENT
5
Machine Gun Mount
7.62-mm mount travel lock removed (TM-10)
EQUIPMENT CONDITION:
Para 35-7
Change 1 35-21