TM 9-2350-222-20-2-3-2
NYLON BALLISTIC SHIELD REMOVAL PROCEDURE (CONT)
33-2.
FRAME 1
PROCEDURE
STEP
NOTE
Do frame 1 when top screws (1) attaching nylon ballistic shield
to gun mount can be seen.
Do frame 2 when top screws (1) attaching nylon ballistic shield
to gun mount cannot be seen.
Using 7/16 inch socket wrench with extension, remove sixteen screws (1), sixteen lockwashers (2), six-
1.
teen flat washers (3), and eight metal strips (4) holding nylon ballistic shield (5) to gun mount.
Using 9/16 inch socket wrench with extension, remove twenty-three nuts (6), flat washers (7), metal clips
2.
(8) holding nylon ballistic shield (5) to turret.
Remove lacing (9) at lower left of nylon ballistic shield (5).
3.
Open nylon ballistic shield (5) at split where lacing (9) was tied. Work shield over gun mount toward
4.
right side of gun mount.
Remove ballistic shield (5).
5.
END OF TASK
Para 33-2 Cont
33-2 Change 1
