TM 9-2350-222-20-1-5
LEFT DISCHARGE VALVE, TUBES, AND RELATED PARTS REPLACEMENT (FIXED FIRE
EXTINGUISHER) (Sheet 1 of 5)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Disassembly
Inspection
Assembly
Installation
15/16 in. socket with 1/2 in. drive
TOOLS:
3/4 in. combination box and open end wrench
7/8 in. combination box and open end wrench (2 required)
Pipe wrench (2 required)
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Vise
1-1/8 in. combination box and open end wrench (2 required)
15/16 in. combination box and open end wrench
Flat-tip screwdriver 4 in. long
Zinc chromate primer (Item 50, Appendix D)
SUPPLIES:
Lockwasher MS35335-34 (3)
Remove powerplant
PRELIMINARY PROCEDURE:
(page 5-1)
NOTE
Since two types of discharge
tube assemblies are used on this
vehicle, this procedure will
cover both types.
Using 7/8 and 1-1 /8 inch wrench, remove
connector on tube (A) from elbow (B).
2.
Using 1/2 inch socket, remove three screws
(C), lockwashers (D), and clamps (E), securing
line to fuel tank. Throw lockwashers away.
TA253755
