TM 9-2350-222-20-1-5
RIGHT DISCHARGE VALVE, TUBES, AND RELATED PARTS REPLACEMENT (FIXED FIRE
EXTINGUISHER) (Sheet 4 of 5)
Using 3/4 inch wrench, install adapter (C)
3.
into bushing (B).
Using 7/8 inch wrench, install tube (D) onto
4.
adapter (C).
Using pipe wrench, install nipple (E) into
5.
valve (A).
Using pipe wrench, install elbow (F) onto
6.
nipple (E).
7.
Using 7/8 inch wrench, install tube (G) onto
elbow (F).
NOTE
For early model, continue with step
8. For late model, perform step 7.1
and go to installation procedures
Using 7/8 inch wrench on tube (G) and on tube (L), install tube (L) onto tube (G).
7.1
Using 1-1/8 inch wrench on tube (G) and 1-1/16 inch wrench on adapter (H), install adapter, (H) OntO
8.
tubes (G).
Using 1-1/16 inch wrench on adapter (H) and 15/16 inch wrench on bushing (J), install bushing (J) into
9.
adapter (H).
Using 15/16 inch wrench on bushing (J) and 3/4 inch wrench on adapter (K), install adapter (K) into
10.
bushing (J).
Using 3/4 inch wrench on adapter (K) and 7/8 inch wrench on tube (L), install tube (L) onto adapter
11.
(K).
TA253753
Go on to Sheet 5