TM 9-2350-222-20-1-5
HYDRAULIC SELECTOR CONTROL VALVE REPLACEMENT (Sheet 6 of 8)
Install new packing onto union (J).
Using 1-3/4 inch wrench, install union (J) into
reservoir connection as shown.
Install four screws and new lockwashers (K)
into new valve.
Aline valve (F) onto reservoir mount and install
tube (L) into union (J) on reservoir.
Install tube (M) into elbow (C) and start
nut (N) on elbow (C).
By hand, start nut (P) onto union (J).
Using inch wrench on nut (P), tighten nut (P)
onto union (J).
Using 1-1/2 inch wrench on nut (N), tighten nut
(N) onto elbow (C).
Using 3/4 inch wrench on four screws and new
lockwashers (K), tighten screws.
Using 1-5/8 inch wrench on nut (Q), tighten nut
(Q).
TA141177
18-75
