TM 9-2350-222-20-1-5
FRONT DRAIN VALVE ASSEMBLY REPLACEMENT (Sheet 4 of 5)
5.
Using punch, line up hole in knob (E) and hole
in valve (B) while second person holds down
spring (D), using two screwdrivers.
6.
Using pliers, start pin (F) in hole in knob (E).
7.
Using hammer and punch, drive pin (F) all the way in hole.
NOTE
Make sure lever (J) fits in center of groove in knob (E) when
holes are lined up.
8.
Line up holes in cage (C), new gasket (H), and hull (G).
Go on to Sheet 5
TA140756
16-144