TM 9-2350-222-20-1-5
DRIVER'S HATCH MOUNT PERISCOPE RETAINER REPAIR (M24 IR PERISCOPE) (Sheet 2 of 4)
3.
Using screwdriver, remove four shoulder
screws (E).
4.
Remove retainers (F) together with two
extension springs (G) from mount (C).
5.
Using hammer and punch, remove two
pins (H) and grooved pins (J) from mount (C).
CLEANING AND INSPECTION:
1.
Visually inspect all parts for damage or wear. All damaged or worn parts must be replaced,
2.
Visually inspect parts for corrosion. AU corroded parts which cannot be cleaned with crocus cloth
(Item 14, Appendix D) or steel wool (Item 55, Appendix D) must be replaced.
TA253605
