TM 9-2350-222-20-1-5
DRIVER'S HATCH MOUNT LID LATCH REPAIR (M24 IR PERISCOPE) (Sheet 2 of 2)
CLEANING AND INSPECTION:
1.
Visually inspect all parts for damage or wear. All damaged or worn parts must be replaced.
2.
Visually inspect all parts for corrosion. All corroded parts which cannot be cleaned with crocus cloth
(Item 14, Appendix D) or steel wool (Item 55, Appendix D) must be replaced.
Position and hold spacer shim (A) to
1.
underside of mount (B).
Install spring (C) in seat on latch (D).
2.
Place latch (D) and spring (C) in position
3.
against shim (A).
4.
Position latch (D) in line with screw attach-
ing holes and hold in place.
Manually install two screws (E) with two
5.
new lockwashers (F) through latch (D) and
shim (A) into mount (B).
Using soket, tighten screws (E).
6.
End of Task
TA253603
