TM 9-2350-222-20-1-5
DRIVER'S HATCH ROLLERS AND WIPERS REPAIR (Sheet 3 of 3)
ASSEMBLY:
1.
Place three rollers (A) in openings on inside of
arm (B) at each end.
2.
nuts (D) to threaded ends of rollers (A)
extending through openings at each end of arm
(B).
3.
Insert offset screwdriver in open ends of arm
(B) and hold screwdriver to grooved head of
rollers (A).
4.
Using 1/2 inch socket, tighten three nuts (D) at
each end of arm (B).
Insert one wiper (E) with one retainer (F) in
5.
each end of arm (B).
6.
Position wipers (E) with retainers (F) to aline
with screw mounting holes at each end of arm
(B).
7.
Using flat-tip screwdriver, install and tighten
8.
End of Task
TA140716