TM 9-2350-222-20-1-5
DRIVER'S HATCH ROLLERS AND WIPERS REPAIR (Sheet 2 of 3)
3.
Insert offset screwdriver in open ends of hatch
cover arm (C) and hold screwdriver into grooved
head of rollers (F).
4.
Using 1/2 inch socket, remove three nuts (G)
and lockwashers (H) from each end of arm (C).
Throw lockwashers away.
5.
Remove offset screwdriver and remove three
rollers (F) from each end of arm (C).
1.
Visually inspect parts for damage or wear. All
damaged or worn parts must be replaced.
2.
Visually inspect parts for corrosion. Corroded
parts which cannot be cleaned with crocus cloth
(Item 14, Appendix D) or steel wool (Item 55,
TA140715
