TM 9-2350-222-20-1-5
FENDER AND SHIELD (REAR) REPLACEMENT (Sheet 4 of 7)
8. Using 7/16 inch socket on screw (AB) and 7/16 inch wrench on nut (AC), remove nine screws (AB), 18
washers (AD), and nine nuts (AC) holding pad (AF) to shield (S). Remove pad (AF) from shield (S).
9. Using 7/16 inch socket on screw (AG) and
7/16 inch wrench on nut (AH), remove three
screws (AG), six washers (AJ), three
lockwashers (AK), and three nuts (AH)
securing pad (AL) to shield (S). Remove pad
(AL) from shield (S). Throw lockwashers
away.
1.
Install pad (A) to shield (B) and secure with
three screws (C), six washers (D), three new
lockwashers (E), and three nuts (F).
2.
Using 7/16 inch socket and 7/16 inch
wrench, tighten three screws (C) and
nuts (F).
Install pad (G) to shield (B) and secure with
3.
nine screws (H), 18 washers (J), and nuts (L).
Using 7/16 inch socket and 7/16 inch
4.
wrench, tighten screws (H) and nuts (L).
