TM 9-2350-222-20-1-5
FENDER AND SHIELD (REAR) REPLACEMENT (Sheet 6 of 7)
NOTE
You may need to aline holes in fender(M)
with taillight bracket (W) using
a pry bar.
9.
Position and secure fender (M) and shield (B)
to taillight bracket (W) using two screws (X),
four flat washers (Y), and nuts (AA).
10. Using 9/16 inch socket on screws (X) and
9/16 inch wrench on nuts (AA), tighten
screws (X) and nuts (AA).
11.
11. Using 9/16 inch socket, install three nuts (AB) and flat washers (AC) to secure outrigger No. 5
stowage box base plate (AD).
12.
Using 9/16 inch socket, install three nuts (AE) and flat washers (AF) to secure fender (M) to
outrigger No. 5 (S).
12.1. If right fender was removed, use 9/16 inch socket and 9/16 inch wrench to install new self-locking nut
16-81
