TM 9-2350-222-20-1-5
REAR TRANSMISSION ACCESS COVER REPLACEMENT (Sheet 1 of 1)
TOOLS:
Putty knife
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Adhesive (Item 4, Appendix D)
SUPPLIES:
Gasket (8364452)
Lockwasher (MS35338-46) (8 required)
Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
PERSONNEL: Two
REMOVAL:
1.
With one person holding access cover (A),
second person, using 9/16 inch socket,
remove eight screws (B) and lockwashers
(C). Throw lockwashers (C) away.
2.
Remove access cover (A) and gasket (D).
Throw gasket away.
3.
Using putty knife, rags, and dry cleaning
solvent (Item 54, Appendix D), remove any
old gasket material from cover and mating
surface on hull.
INSTALLATION:
Apply adhesive (Item 4, Appendix D) to
1.
new gasket (D) and position gasket on cover (A).
With one person holding cover (A) and
2.
gasket (D) in position, second person, using
socket, install eight screws (B) and new lockwashers (C).
End of Task
TA253560
