TM 9-2350-222-20-1-4
STEERING CONTROL TO TRANSMISSION SHAFT CONNECTING LINK REPLACEMENT
(Sheet 2 of 2)
INSTALLATION:
1.
Position link (A) over stud (B) with blind splines alined.
Using wrench, install nut and washer (C and D) on stud (B). Using socket and torque wrench,
2.
tighten nut (C) to 15-20 lb-ft (20-27 N-m).
Using pliers, install new cotter pin (E) through nut (C) and stud (D).
3.
Position rod (F) in link (A).
4.
Using wrench, install bolt (G). Using socket and torque wrench, tighten bolt (G) to 15-20 lb-ft
5.
(20-27 N-m).
Using socket and wrench on screw (H) and nut (J), install screw and nut on link (A).
6.
Install transmission shroud (page 9-23).
7.
Install top deck (page 16-23).
8.
End of Task
TA140573
15-37
