TM 9-2350-222-20-1-4
STEERING CONTROL TO TRANSMISSION SHAFT CONNECTING LINK REPLACEMENT
(Sheet 1 of 2)
TOOLS: Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N-m)
Slip joint pliers
9/16. in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench
Ratchet with 1/2 in. drive
SUPPLIES: Cotter pin (MS24665-283)
PRELIMINARY PROCEDURES: Remove transmission
shroud (page 9-20)
Remove top deck
(page 16-21)
REMOVAL:
Using socket and wrench on screw (A) and nut (B), remove nut and screw.
1.
Using wrench on bolt (C), remove bolt.
2.
Using pliers, remove cotter pin (D). Throw cotter pin away.
3.
Using wrench on nut (E), remove nut (E) and washer (F).
4.
Remove link (G) from transmission stud (H).
5.
TA253537
Go on to Sheet 2
15-36
