TM 9-2350-222-20-1-4
UNIVERSAL JOINT REPAIR (Sheet 1 of 2)
TOOLS: Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N.m)
13/16 in. socket with 1/2 in. drive
18 in. hinge handle with 1/2 in. drive
3/8 in. combination box and open end wrench
Diagonal cutting pliers
Slip joint pliers
Hammer
26 in. pinch bar
SUPPLIES: Lockwire (Item 59, Appendtix D)
Oil (Item 43, Appendix D)
Remove universal joint (page 12-11)
PRELIMINARY PROCEDURE:
DISASSEMBLY:
Place universal joint on end (A).
1.
Using cutting pliers, cut four lockwires (B).
2.
Remove lockwires.
Using socket and hinge handle, loosen eight
3.
screws (C). Using hammer, gently tap hinge
handle to loosen screws, if necessary.
4.
Place universal joint on side (D).
6.
Using socket and hinge handle, remove four
screws (C).
Using pinch bar, pry loose spider assembly
6.
(E) from coupling plate (F).
Lift spider assembly (E) from coupling plate
7.
(F).
Using wrench, remove two lubrication
8.
fittings (G) if damaged or broken.
Go on to Sheet 2
TA140310
12-18
