TM 9-2350-222-20- 1-4
SHIFTING CONTROL CONNECTING LINK REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Using 9/16 inch wrench, install nuts (B) and (C) onto link (A),
2.
Using 9/16 inch wrench, install rod ends (D) and (E) onto link (A). Adjust link assembly to obtain
same distance between holes as previously recorded.
3.
Using 9/16 inch wrench to hold rod ends (D) and (E), and crowfoot wrench, adapter, and torque
wrench on jam nuts (B) and (C), tighten jamnuts (B) and (C) to 15-20 lb-ft (20-27 N. m ).
FORWARD OF RIGHT
AMMO RACK
DRIVER'S STATION
4.
Position link assembly (A) into brackets (F) and (G) and, using 9/16 inch socket, install screws (H) and
(J) through brackets (F) and (G) and rod ends (D) and (E).
5.
Using 9/16 inch socket and torque wrench, tighten screws (H) and (J) to 15-20 lb-ft (20- 27 N.m).
6.
End of Task
Change 5
11-41