TM 9-2350-222 -20-1-4
SHIFTING CONTROL CONNECTING LINK REPLACEMENT (Sheet 1 of 2)
TOOLS:
Adapter, 1/2 in. to 3/8 in.
5 in. Extension with 3/8 in.drive
12 in. Extension with 3/8 in.drive
9/16 in. socket with 1/2 in.drive
9/16 in. combination box and open end wrench (2 required)
Ratchet with 1/2 in.drive
Torque wrench with 1/2 in.drive (0-175 lb-ft) (0-237 N.m)
Rule
9/16 in. crowfoot wrench with 3/8 in. drive
PRELIMINARY PROCEDURE: Block tracks (TM 9-2350-222-10)
REMOVAL:
Using 9/16 inch socket, remove screws (A) and (B). Remove link assembly (C) from vehicle.
1.
--
Record length of link. Using one 9/16 inch wrench to hold rod ends (D) and (E) and other 9/16 inch
2.
wrench on nuts (F) and (G), loosen nuts (F) and (G) from rod ends (D) and (E).
Using 9/16 inch wrench, remove rod ends (D) and (E) and nuts (F) and (G) from link (C).
3.
Change 5
11-40
